Help Center Panels Panels 2GIG GC2/GC2E GC2 GoControl - Program TS-1 Touchscreen

GC2 GoControl - Program TS-1 Touchscreen

1. Press the logo at bottom right, then enter the default installer code 1561.

2. Press System Configuration, then press the Go To.

3. Press 04, then press the left or right arrows to scroll to an unused keypad. Press the down arrow to proceed.

4. Press the arrows to scroll to Used, then press the down arrow to proceed.

5. Press the arrows to select (1059) 2GIG-TS1 wireless touchscreen, then press the down arrow to proceed.

2GIG_Q4_TS-1_Touchscreen_Programming_1_Equipment_Code.png

6. Press Learn, then press Pair with Panel on the TS-1 Touchscreen.

7. If successful, press Ok, then press the down arrow to continue.

8. Press Insert, then use the left or right arrows to scroll to the first word.

9. Press Insert, then use the arrows to scroll to 2nd word. This step can be repeated to enter up to 16 words. Press the down arrow to proceed.

10. Press Edit Next to add more, or press Skip, then press End to exit.

11. Press Exit to exit the programming menu.