IQ Panel 2 - Programming a CT100 Thermostat

1. Press or swipe down the clock display at top to access settings, then press Settings.

2. Press Advanced Settings, then enter the default installer code 1111 or 2222.

3. Press Installation, then press Devices.

4. Press Add Device, then Pair.

5. At the thermostat press the Menu button. The screen displays r1 and Mate appears under the antenna icon.

6. Press Mate again. The Mate indicator will flash on the display.

7. If successful, the thermostat displays Link under the antenna icon. Press the Menu button to exit.

8. The IQ Panel 2 beeps and displays device settings. Press Name, then select the pre-determined name or press Custom Name to create your own name.

9. If custom name was selected, press Custom Desc and enter your custom name. Press Check or the keypad icon.

10. Press Back or Home to exit.