2GIG GC2 GoControl - Sensor Test

Summary: Performing a system test on your 2GIG GoControl panel ensures that all sensors and functions are operating correctly. Follow the steps below for a complete test.

Step-by-Step Instructions

1. Access the Security Menu

Press Security, then Menu.

Access Security Menu Menu Options

2. Enter the Toolbox

Press Toolbox, then enter your master code.

Entering Master Code Toolbox Menu

3. Start System Test

Press System Test. The GoControl panel will enter test mode.

Start System Test System Test in Progress

4. Test Sensors

Open door and window sensors, and walk by motion detectors.

Door Sensor Test Window Sensor Test Motion Detector Test

5. Confirm Sensor Functionality

The panel will beep and display signal strength if all sensors pass. Press OK to proceed.

Sensor Signal Strength

6. Test Home Button Colors

Press each button to test the home button colors. Press No or Yes as prompted.

Home Button Test

7. Test Emergency Buttons

Press each emergency button as listed on the screen, then confirm by pressing No or Yes.

Emergency Button Test

8. Perform Sounder Audio Test

Press Sounder Audio Test. Confirm if the internal speaker sounds.

Sounder Audio Test

9. Complete the System Test

If all tests are successful, press OK. Then, press Back to exit.

Exiting System Test

Note: Regular system tests help maintain the reliability of your security system.