GC3—Program Wi-Fi Access Point

• Provides 2.4 GHz WiFi network to cameras or other WiFi devices
• Range is limited compared to WiFi using a conventional WiFi router
• Not available if GC3 is connected to 5 GHz WiFi network

1. Press SYSTEM SETTINGS then enter Master Code then press NETWORK SETTINGS

2. Press NETWORK SETTINGS then press ACCESS POINT

3. To use default settings move slider to ENABLE then press or HOME button to exit

4. To change settings press Pencil icon to the right to change each setting

5. To change Access Point name press pencil icon by SSID, enter name then press DONE

6. To change Password press pencil icon by Password, enter password then press DONE

7. To change IP Address press pencil icon by IP ADDRESS, enter address then press DONE

8. Press SAVE ACCESS POINT SETTINGS then press or the HOME button to exit