How to Program the Honeywell 5890 to the Lynx Touch Panel

Please follow the steps below to connect your Honeywell 5890 motion detector to the Honeywell Lynx Touch panel.

1. Press Security, select the more tab, then press Tools.

2. Enter the default installer code 4112, press Program, then Zones.

3. Press Add New, then Serial Number and activate the sensor to learn or enter the 7-digit serial number, then select Done.

4. Press Loop Number to toggle loop 1, 2, 3 or 4.

5. Press Zone Description 1 or 2, enter the first letter of the word, press the up or down arrows to select the word, then press Done.

6. Press Device Type, then select sensor type.

7. Press Response Type, then select response.

8. Select your preferred options for each Sensor Report, Chime, and Supervision, then press Save to exit.