How to Program the QS1230-840 to the IQ Panel 2

Please follow the steps below to connect your QS1230-840 IQ Motion-S detector to the IQ Panel 2.

1. Swipe down from clock display to show the settings menu, press Settings, then press Advanced Settings.

2. Enter the default installer code 1111 or default dealer code 2222, press Installation, then Devices.

3. Press Security Sensors, then Auto Learn Sensors.

4. In the motion detector, insert a paperclip to press then release the reset button to reboot. Learning can take 30 to 60 seconds. The IQ Panel 2 beeps if successful and displays sensor settings.

5. Press Sensor Type, then select Motion from the list.

6. Press Sensor Group, then select 17 or 20.

7. Press Sensor Name, then select from list or press Custom Description to enter a custom name.

8. Press Chime Type, then select None.

9. Press Voice Prompts, select Off, then press Add New to save and exit.