Interlogix Freeze Sensor—Battery Replacement

Find the image of your freeze sensor below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.

Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here for steps to clear an alert from your Simon XT panel. Otherwise, if you have a Simon XTi panel, click here for steps to clear trouble alerts.

Interlogix / GE / ITI 60-504-10-319.5 Freeze Sensor:

Press the latch to open the cover, then remove and replace SAFT 14250 3-Volt Lithium battery.

Interlogix 60-742-95R / NetworX NX-658 Freeze Sensor:

Press top button to remove cover, then remove and replace 2 AAA Alkaline batteries.

Interlogix / Ecolink TX-E611 Flood Freeze Sensor:

Remove sensor from the mounting bracket, then remove the backplate as shown below. Remove and replace CR2450 3-Volt Lithium battery.