ADC-V622 Indoor Video Camera Guide

Specifications

Digital pan tilt—camera lens takes very large image and pans around it
1920 x 1080 pixel video resolution
15' night vision range
Field of view 180° horizontal and vertical
2-way talk/listen
Bluetooth connection to smartphone, can act as an external speaker
Wi-Fi 802.11 b/g/n
Ethernet connection
Operating temperature 32°F to 104°F

Features

Power-over-Ethernet
Tap to call out
Digital pan/tilt/zoom
180° field of view
Infrared night vision
Bluetooth music streaming
Works with the Brinks Home™ App

Factory Default

Warning: erases everything, camera must be re-added to your account.

1. Press the Menu button until you hear the camera say 'Menu, use volume buttons to scroll through options'.

2. Press the + button until you hear 'Factory reset press the menu button to activate'.

3. Press the top Menu button, then you will hear 'Press menu button again to confirm factory reset'.

4. Press the top Menu button again, then you will hear 'Resetting'.

Wi-Fi setup using WPS Enrollment

1. Press the Menu button until you hear the camera say 'Menu, use volume buttons to scroll through options'.

2. Press + button until you hear "WPS press the menu button to activate".

3. Press Menu button until you hear "WPS activated press any button to exit". The front LED flashes blue.

ADC-V622 Pan Tilt Camera LED Blue

4. Press and release router's WPS button or enable WPS mode in router programming.

Router WPS Button

5. If successful after 1 minute the camera LED turns green.

ADC-V622 Pan Tilt Camera LED Green

Wi-Fi Setup by AP Access Point

1. Press the Menu button until you hear the camera say "Menu, use volume buttons to scroll through options".

2. Press the + button until you hear "Access point. Press menu button to activate". Press the Menu button again.

3. The camera LED flashes blue.

ADC-V622 Pan Tilt Camera LED Blue

4. Go to your mobile device Wi-Fi settings. Look for ALARM xx:xx:xx, then press Connect.

5. Open a web browser, then enter 192.168.1.1. The camera menu appears, then press Scan.

6. Swipe down, then select your Wi-Fi network. Swipe up.

7. Enter your Wi-Fi password, then press Submit. Press Ok. The camera beeps and the LED turns solid green.

Hardwire Connection to Router

When hardwire connecting the ADC-V622 directly to a router, use a standard ethernet cable to connect from the port shown on the device to an available port on your router.

ADC-V622 Pan Tilt Camera Connect To Router

Add Camera using the Brinks Home™ App Website

Note: The camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

2. Select Settings.

002_Brinks_Home_App__Desktop__Video-Live_Video_Default.png

3. Scroll to the bottom of the page and select Add Video Device.

4. The camera should be detected. Enter the camera name, then select Install.

004_Brinks_Home_App__Desktop__Name_Camera_and_Install.png

5. The camera is added to the network, which can take several minutes.

6. When finished, select Live View to view images from a newly installed camera.

Add Camera using the Brinks Home™ Mobile App

Note: The camera must first be connected to Wi-Fi.

1. Log in to the Brinks Home App and press Video.

2. Select Settings by pressing the gear icon in the upper right-hand corner.

3. Select Add Video Device, then select your compatible device type.

003b_Mobile_App_Select-Device_Clean

4. The camera should be detected. Enter the camera name, then select Next.

5. The camera may take several minutes to configure.