Simon XTi - Sensor Groups

To check what group your sensor is assigned to:

1. Press the settings gear, then press the down arrow several times until you get to Programming.

The Simon XTi panel screen with the Settings gear icon circled The Simon XTi panel Status and Settings screen with the down arrow circled

2. Press Enter by Programming, enter the default installer code 4321, then press OK.

The Simon XTi panel Status and Settings screen with the Enter button next to Programming circled The Simon XTi panel screen with a keypad available and the OK button circled

3. Press Sensors, then select Edit Sensor.

The Simon XTi panel System Programming screen with the Sensors button circled The Simon XTi panel Sensors screen with the Edit Sensor button circled

4. Press Edit by sensor, then select Sensor Group.

The Simon XTi panel Edit Sensor screen with five Edit buttons circled

5. Enter sensor group (see list below), press Save, then Close several times to exit.

The Simon XTi panel Edit Sensor Group screen with the Save button circled

The following are the most common sensor groups:

Group 01 = Remote Panic, Keyfob or Touchpad with Audible Police Panic
Group 03 = Remote Panic, Keyfob or Touchpad with Silent Police Panic
Group 06 = Remote Panic, Keyfob or Touchpad with Auxiliary Medical Panic
Group 10 = Entry and Exit Door
Group 13 = Window Sensor
Group 14 = Interior Door Sensor
Group 17 = Indoor Motion Detector
Group 26 = Smoke or Heat Detector
Group 29 = Freeze Sensor
Group 34 = Carbon Monoxide Detector
Group 38 = Water Flood Sensor

Simon XTi - Sensor Groups

Related Articles