Close
Close
Help Center How to Remove a Thermostat from the Simon XTi

How to Remove a Thermostat from the Simon XTi

1. Press the gear icon at the bottom right, then press the down arrow several times.

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg


2. Press Enter by Programming, then enter your master code.

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


3. Press Interactive Services, then press Remove Device.

Interactive_Services_01_Main_Select.jpg Z-Wave_Delete_01.png


4. The Simon XTi enters Z-Wave delete mode.

Z-Wave_Delete_02.png


5. Pull the thermostat top cover toward you to remove then press the Mate button.

ZW-TSTAT-100_Thermostat_-_Simon_XTi_Mate_button.png


6. After a few seconds the Simon XTi beeps and shows Device deleted, press Close to exit.

Z-Wave_Delete_03.png


7. Press Close twice to exit the Z-Wave and Interactive Services menus.

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png


8. Press Close again to exit programming.

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Related Articles

Contact Support