Simon XTi - Adding Z-Wave Devices

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

3. Press INTERACTIVE SERVICES then press Z-WAVE

4. Press ADD DEVICE to start learning process

Plug-in Lamp or Light/Appliance Module

Double click the Mate button

IQ Siren

Press the button at the bottom of the siren.

In-Wall Dimmer or On/Off Light Switch
Turn the light switch on and off

In-Wall Outlet
Double click the button in the middle of the outlet.

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

Yale Touchscreen Deadbolt:

1. Touch the screen with the back of your hand or fingers to activate.
2. Enter the 4 to 8-digit master code, then press #. The lock should sound a happy tone.
3. Press 7, then press # to enroll. The lock should sound a "Happy" tone.

GE Basic Thermostat
Remove top cover then press the MATE button

Radio Thermostat CT30, CT100 and CT101

1. Press the thermostat MENU button, "r1" displays and MATE appears under antenna icon

2. Press MATE button again, MATE begins flashing

3. If successful the thermostat displays LINK under antenna icon, press the MENU button to exit

Trane Remote Energy Management Thermostat

Press the LEFT button twice then scroll down to Z-WAVE INSTALL and press SELECT then YES

5. Once added the Simon XTi beeps and displays "Device xx added", press CLOSE to exit

6. Press CLOSE to exit Z-Wave Menu then Interactive Services

7. Press CLOSE again to exit programming