Simon XT Door/Window Sensors—Battery Replacement

Find the image of your door/window sensor below to view instructions on how to complete your battery replacement. Due to the versatility of your panel, only commonly paired sensors are shown. If your specific sensor is unlisted, you can search for other sensors here. If you need further assistance, you can text a Support Representative any time at 469.513.8685.

Once you've replaced the batteries, the error on your panel should clear within one hour. If you would like to clear the error manually, click here for steps to clear an alert from your Simon XT panel. Otherwise, if you have a Simon XTi panel, click here for steps to clear trouble alerts.

Interlogix 60-670-95R Door Window Sensor:

Press the end button to remove the cover, then remove and replace 2 AAA alkaline batteries.

Interlogix 60-362N-10 Door Window Sensor:

Press end latch to remove the cover. The battery is either CR123A or SAFT LS14250 Lithium battery.

Interlogix 60-688-95 Micro Door Sensor:

1. Pull sensor away from backplate then insert a screwdriver into side slots to remove the cover.

2. Slide CR2032 Lithium battery from holder to replace.

Interlogix / GE Security TX-1012-01 Micro Door Sensor:

1. Insert coin or flathead screwdriver into corner slot then twist to remove the cover from the backplate.

2. Remove inside cover then slide CR2032 Lithium battery from holder to replace.

This is a non-exhaustive list, as Interlogix panels are compatible with a large variety of sensors including different brands with or without a translator. If your specific sensor was not shown, you can search for other sensors here. Otherwise, if you need further assistance, you can text a Support Representative any time at 469.513.8685.