RE524X—Tamper Error
A tamper error occurs when the panel is reading that the translator's cover is not attached properly. To address the tamper error on your RE524X translator, follow the instructions below.
Step-by-Step Instructions:
- Open the cover by lifting the tab on the right side of the translator.
- Ensure all wires are neatly arranged and the battery is conforming to the battery compartment.
- Swing the device door back to close the translator, ensuring the cover closes tightly and snaps into place without any obstruction.
You will also need to clear the error from the panel memory. Select your panel below to view instructions:
Qolsys:
2GIG:
Interlogix: