How to Program Wi-Fi on the Honeywell Lynx Touch L5210

Enable Wi-Fi and Cellular Communication

1. Press Security, select More, then Tools.





2. Enter the default installer code 4112, then press Program.





3. Press Communicator, then press Communication Path until Wi-Fi & GSM is displayed.





4. Press Save, then Ok.





5. To exit, press the back arrow, then press Yes when prompted.

Connect the Panel to Your Wi-Fi

1. Press Security, select More, then Tools.





2. Enter the master code, press Wi-Fi Config, then press Scan Access Points.





3. Once you see your Wi-Fi network, select it, press Edit, press Key, then enter your Wi-Fi password. Press Done.





4. Press Join to connect to Wi-Fi network. If successful, a pop-up appears. Press Ok, then press the back arrow or Home to exit.